12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier
12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier

12V Power Supply 50A 600W Switch Mode Power Supply SMPS AC/DC Adapter 110V / 220V AC to DC 12 Volt 50 Amp 45A Converter Transformer LED Driver for LED Light CCTV Camera Radio Speaker Amplifier

$55.99

  • Brand: ALITOVE
  • Product Code: 12V-50A-T
  • Availability: In Stock
  • Ex Tax: $55.99

Product Description

Parameter

  • Input: AC110V/220V 50/60Hz
  • Output Voltage : DC 12V
  • Output Current: 50A max
  • Output Wattage: 600W max
  • Fix Screw Hole Diameter: 2.5mm (0.1inch)
  • Working temperature: -15 to 55 degree Celsius
  • Storage temperature: -20 to 60 degree Celsius
  • Ambient Humidity: 0~85% Non-Condensation
  • Material: Metal, Electronic Parts
  • Safety Compliance: CCC/ FCC / CE
  • Weight: 3.5 lb / 1600g

Connection instruction

  • L: Live wire
  • N: Negative wire
  • 〨: Ground
  • +V: DC power output “+”
  • -V: DC power output “-“
  • +V ADJ: Adjust the output voltage (10%)

Kindly note

  1. 110V/220V must be selected by switch before using to avoid damaging. Please set the switch to 110V for USA.
  2. Once it is powered, the fan will run. It does make a noise and the speed of the fan is load based. So the higher the load, the louder the noise.
  3. Professional licensed electrician suggests that the max use should be no more than 80% of the full loads. We recommend to use this 12V 50A 600W power supply to power devices less than 480W.
  4. For motor devices, the start current is much higher that rate power. Please don’t use this SMPS to power motor devices higher than 35A 420W
  5. High Voltage inside, do not remove the cover.
  6. It comes without installation instruction, wiring cable, on/off switch and screws. Professional Installation of qualified electrician is highly recommended.
  7. Indoor use only!

Package included

  • 1 x 12V 50A 600W Switch Mode Power Supply

Write a review

Note: HTML is not translated!
    Bad           Good