16.4ft 150 Pixels WS2812B Individually Addressable RGB LED Strip Light Dream Color Not Waterproof White PCB 5V DC
$24.99
- Product Code: WS2812B-150WH-NP
- Availability: In Stock
- Ex Tax: $24.99
Features:
Individually addressable LED
WS2812B RGB 5050 LED. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want. 256 gray levels adjustable and 24-bit color display.
Support Many Controllers
It can be programmed with Arduino, FastLED library, Raspberry Pi, Fadecandy, T1000S, K1000C etc. It can also be controlled by SP105E SP108E pre-programmed app controlled pixel controllers and SP106E SP107E Colorful x2 sound activated music controllers.
Great for DIY
Each LED is an independent and complete circuit cell. It can be cut and welded freely along the cutting line to meet different length requirements. Flexible design, you can bend it to any shape you want.
User-friendly Design
Designed with 3pin JST-SM connectors on both ends for easy hooking up. Separate power/ground wires on both ends for injecting power in case of voltage drop. There are self-adhesive tape on its back, you can easily install it on any dry and flat surface.
Wide Application
It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, wedding party lighting, home and car decoration, city skyline, building outline and so on.
Parameter:
- Light source: 5050 RGB LED
- LED Qty: 30pcs per meter
- Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm
- The gray level: 256
- Color: full color (24-bit )
- View angle:120°
- Voltage: DC 5V
- Power: 9W/M
- Waterproof: Not Waterproof
- Dimension: 5000*12*4mm
- Package: 16.4ft/roll
- Life span:≥50000hrs
- Port scanning frequency reaches to 2KHz/s
- Data transmitting speed is up to 800Kbps
- RGB order: Green/Red/Blue ( Please set up the controller before you use it. )
- Red wire: 5V+ / Black Wire: GDN / Green wire: Data
Kindly note:
- You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.
- Power supply need to be selected according to the total power of LED Strip. We recommend to use 80% max power of power supply.
- It is better to inject power between each 5 meters when connect them in series in case of voltage drop.
- Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths.
Package:
- 1x 16.4ft 150 pixels WS2812B led strip (Power supply and controller are not included)
- 1x Male 3PIN JST connector
