Your shopping cart is empty!
$18.50
Warning:
Parameter:
Precautions:
Package included:
|
|
|
|
|---|---|---|---|
① Connect the power supply to the controller. (If your light is 5V, please use 5V power supply, never use 12V or 24V power supply.) | ② Peel off more insulation coating from the 3pin JST connector and make sure the copper cores can be inserted into the controller's output ports. | ③ Plug 3-pin wire of the JST connector into controller's output ports and tighten them with small screw driver. | ④ Hook up the led lights and controller by the JST connectors. The colors of connector wires may be different. Please distinguish VCC GND CLK DAT wires of the led strips. |
Different lights may have different connectors. No matter what the type and color of the connector is, please make sure the data wire is connected to DAT port of the controller, GND to GND, V+ to VCC, clock to CLK.
|
|
|
|
|---|---|---|---|
①Search "Magic-LED" in app store or scan the QR code on the box. Install the app on your smart phone or Tablet. | ③Enter SP105 control page. Turn on on/off button. | ⑤Set up the correct IC model and R/G/B sequence according to your LED lights. If your lights are ALITOVE WS2812B or WS2813, please choose GRB and WS2811. | ⑥ Set up total pixels to 2048, which is the max pixels the controller can drive. If your light' pixels are more than 2048, the rest pixels will not work. |
What can you do if you cannot make it work?
