Flexible light belt manufacturer: common practice and key points for attention of stair light belt
Many customers will choose to do the mesh red light stone staircase with the light staircase, the stone staircase with the light belt light position of the common stone practices and what need to pay attention to?
Methods a
Step on both sides and stick the lamp strip to the lower mouth of both sides. This way the lamp bar needs to buy relatively small specifications, but still can see the lamp bar.
Lamp belt mode - double bottom stick lamp strip
Way 2
Step outside convex 35mm turn right Angle 50mm, inside the lamp belt. Material with natural marble, this way needs to add 80mm wide artificial stone under the tread surface to increase the overall strength of the convex position, to prevent stepping off. Light belt mode - step on the surface to turn right Angle 50mm, inside the light belt
Position section of the lamp belt - the stepping surface turns to a right Angle of 50mm, with the lamp belt inside
Methods three
Step outside convex 35mm turn right Angle at the lower end of the left about 50mm, inside the hidden light belt. Material with natural marble, this way also needs to add 80mm wide artificial stone under the tread surface to increase the overall strength of the convex position, to prevent stepping off, increase 20mm inside the vertical plate plus a small piece of artificial stone, to prevent kicking off.
Light belt mode - step on the bottom of the right Angle to leave 50mm, inside the light belt
Position section of the lamp belt - the lower end of the stepping surface turns to a right Angle, leaving 50mm, with the lamp belt inside
Now step on the surface position of the light belt to do more of these three ways, is also the best way to accept. So you can choose the way to make the stone staircase with light according to your preferences.